P001F Code- 'A' Camshaft Profile Control Circuit High Bank 2

What Does Code P001F Mean

This PCM code means that the signals that are moving between the crankshaft and the camshaft are not in proper timing. When this occurs, you will experience difficulty with your vehicle’s performance. The PCM will store trouble code P001F, and activate the Check Engine Light.

engine code P001F	P001F fix	obd P001F	dtc P001F
obd code P001F	obd2 P001F	P001F car code	diagnostic code P001F
car code P001F	check engine code P001F	fehlercode P001F	P001F fiat
codigo P001F	codigo falla P001F	P001F kody błędów	codigo de falla P001F

Possible symptoms

• Engine Light ON (or Service Engine Soon Warning Light)

What causes the P001F code?

The P001F code can be caused by:

• A bad crankshaft sensor
• A bad camshaft sensor
• Bad wiring going to the camshaft sensor
• Missing teeth in the timing belt
• A broken or loose timing chain tensioner

P001F OBDII Repair :

With P001F code so start with the basics like a fuel pressure and fuel volume test. Or, you can start on the electrical side by doing a voltage drop on both the power and ground connections for the fuel pump. Some shops are reporting corrosion on the fuel pump ground that reduces power and fuel pressure.

Excessive air inflow can be caused by a vacuum leak, a dirty sensor or, an exhaust gas recirculation valve not closing properly. If the problem is not enough fuel, the culprit may be dirty injectors or fuel filters, a weak fuel pump or a leaky fuel pressure regulator. The lean fuel mix error may be accompanied by rough idling, engine misfires, hesitation during acceleration and overall poor engine performance.