P0165 Code - O2 Sensor Circuit Slow Response Bank 2 Sensor 3

Discussion in 'P - Powetrain Codes' started by fault code, Dec 11, 2017.

Tags:
  1. fault code

    fault code Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    1,023
    Likes Received:
    0
    Trophy Points:
    36
    What Does P0165 Mean?

    The P0165 code means that the powertrain control module is not getting a normal response from the O2 sensor.

    O2 sensors calculate the level of oxygen that passes by them. The signal that the O2 sensor sends to the powertrain control module is in the form of a reference voltage. If this voltage becomes lower than a specified range given by the manufacturer due to more resistance in the circuit, this code can appear.

    This code can also be stored in the powertrain control module if the voltage reading coming from the O2 sensor remains the same for an extended period of time indicating a slow response.

    engine code P0165P0165 fixobd P0165dtc P0165
    obd code P0165obd2 P0165P0165 car codediagnostic code P0165
    car code P0165check engine code P0165fehlercode P0165P0165 fiat
    codigo P0165codigo falla P0165P0165 kody b??dówcodigo de falla P0165

    What are the common causes of P0165 ?

    Common causes of code P0165 are much the same across all applications, and could include the following-
    • Damaged, burnt, shorted, disconnected, or corroded wiring and/or connectors
    • Open circuits
    • Blown fuses (where applicable)
    • Defective oxygen sensors
    • Heavily fouled or contaminated oxygen sensors
    • PCM failure is a rare event, and the fault must be sought elsewhere before any controller is replaced
    What are the symptoms of P0165 ?

    Symptoms of a P0165 diagnostic trouble code may include:
    • Hesitation upon acceleration
    • Excessive exhaust leak
    • Rich or lean exhaust
    • If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected
    How do you troubleshoot P0165 ?

    The valves of each cylinder are kept closed using a pair of arms that replace the conventional engine's roller-type rocker arm. P0165 code one of these arms follows the cam profile while the second arm connects to the valves. During normal engine operation the two arms are joined by a locking pin.



    Searches related to P0165 - O2 Sensor Circuit Slow Response Bank 2 Sensor 3
    • p0164
    • p0166
     

Share This Page