P0166 Code - O2 Sensor Circuit No Activity Detected Bank 2 Sensor 3

Discussion in 'P - Powetrain Codes' started by fault code, Dec 11, 2017.

Tags:
  1. fault code

    fault code Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    1,023
    Likes Received:
    0
    Trophy Points:
    36
    What Does P0166 Mean?

    OBD-II Code Decreased engine performance is defined as a O2 Sensor Circuit no Activity Detected
    The purpose of the oxygen sensor is to measure the oxygen content in the exhaust gases after they leave the combustion process of the engine. This information is critical to the PCM's ability to maintain efficient fuel economy. When the PCM detects a failure of the sensor or the information received from the sensor, it will set code P0166.

    engine code P0166P0166 fixobd P0166dtc P0166
    obd code P0166obd2 P0166P0166 car codediagnostic code P0166
    car code P0166check engine code P0166fehlercode P0166P0166 fiat
    codigo P0166codigo falla P0166P0166 kody b??dówcodigo de falla P0166

    oxygen-fuel-sensors-1-300x178.jpg

    What are the common causes of P0166 ?

    Possible causes include a faulty oxygen sensor, faulty electrical connector at the oxygen sensor, faulty or shorted wiring in the oxygen sensor circuit, a blown fuse for the oxygen sensor (if applicable), low or excessive fuel pressure, a vacuum leak on the engine, excessive exhaust leaks, or a faulty PCM. PCM failure is rare.

    What are the symptoms of P0166 ?

    These could include a lean or rich condition in the engine, decreased fuel efficiency, black smoke from the tailpipe, and an illuminated service engine soon lamp.

    How do you troubleshoot P0166 ?

    Now, clear the codes and test-drive the vehicle to see if the code is reset. Look for missing ground strap or a rusty ground where the fuel tank is grounded to the frame. Check for damage to the wiring harness connector. If the engine displays a miss and there wasn't a code, determine which cylinder is misfiring. If the exhaust manifold is visible, spay or pour a small amount of water on each cylinder exhaust port. Water will evaporate immediately on good cylinders and slowly on the missing cylinder. If this can't be accomplished pull the plugs and check the condition.

    Searches related to P0166 - O2 Sensor Circuit No Activity Detected Bank 2 Sensor 3
    • p0167
    • p1166
    • p0116
    • p0016
     

Share This Page