P0426 Code - Catalyst Temperature Sensor Range/Performance Bank 1 Sensor 1

Discussion in 'P - Powetrain Codes' started by fault code, Jan 14, 2018.

Tags:
  1. fault code

    fault code Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    1,023
    Likes Received:
    0
    Trophy Points:
    36
    What Does P0426 Mean?

    Is the fuel pump sometimes not priming when you turn the key to ON(II)? Start by measuring the fuel pressure and checking whether you have bright white-bluish spark at all four plugs. The mechanical timing is also something that you should check, as we mentioned above. When you see P0426 engine fault code on your engine code reader this description will help you.

    engine code P0426P0426 fixobd P0426dtc P0426
    obd code P0426obd2 P0426P0426 car codediagnostic code P0426
    car code P0426check engine code P0426fehlercode P0426P0426 fiat
    codigo P0426codigo falla P0426P0426 kody b??dówcodigo de falla P0426

    What are the common causes of P0426 ?

    The most common cause of this code is due to a faulty catalytic converter. Bad oxygen sensors are also a possibility but if this is the case an oxygen sensor code will usually accompany the catalytic converter code. Always diagnose and repair oxygen sensor codes before attempting to diagnose catalytic converter codes. Since the catalytic converter is not designed to wear out, its failure is normally associated with some contributing malfunction. Contributing factors in catalytic converter failure may include incorrect fuel usage, excessive fuel being dumped into the exhaust system due to a faulty coolant temperature sensor, mass air flow sensor, manifold air pressure sensor, fuel pressure regulator, or fuel injection component, an ignition misfire, retarded spark timing, or oil contamination. Leaks from an exhaust manifold, down pipe, flex hose, or other exhaust component that is upstream from the catalytic converter can also appear to the PCM as catalytic converter failure.

    15.jpg

    How do you troubleshoot P0426 ?

    With the valve disconnected, the red voltmeter lead should be attached to the IMRC valve power wire and the black voltmeter lead connected to ground. Use the DVOM to test resistance and continuity on all system circuits if actuator and sensor resistance levels are in compliance with manufacturer's specifications. Look at the plug wires to make sure they are not burnt or laying on the exhaust.

    Searches related to P0426 - Catalyst Temperature Sensor Range/Performance Bank 1 Sensor 1
    • p0426 mercedes
    • catalyst temperature sensor bank 1
    • catalyst temperature bank 1 sensor 1
    • p0427
    • p0426 ford
    • catalytic converter temperature test
    • p0425
    • p0462
     

Share This Page