P0745 Code - Pressure Control Solenoid Malfunction 'A'

Discussion in 'P - Powetrain Codes' started by fault code, Mar 19, 2018.

Tags:
  1. fault code

    fault code Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    1,023
    Likes Received:
    0
    Trophy Points:
    36
    What does P0745 Mean?

    When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

    engine code P0745P0745 fixobd P0745dtc P0745
    obd code P0745obd2 P0745P0745 car codediagnostic code P0745
    car code P0745check engine code P0745fehlercode P0745P0745 fiat
    codigo P0745codigo falla P0745P0745 kody b??dówcodigo de falla P0745

    What are the common causes of P0745 ?

    The most common causes for a P0745 code include a defective valve body or pressure solenoid. Your vehicle may also suffer from poor or defective wiring on your pressure solenoid. Another cause could be a dirty transmission that inhibits and restricts your vehicle’s hydraulic passages.

    1.jpg

    How do you troubleshoot P0745 ?

    Check to make sure they are not burnt or corroded. If in doubt, get some Electrical Contact cleaner at any parts store if cleaning of the terminals is needed. With the valve disconnected, the red voltmeter lead should be attached to the IMRC valve power wire and the black voltmeter lead connected to ground. If the engine displays a miss and there wasn't a code, determine which cylinder is misfiring. If the exhaust manifold is visible, spay or pour a small amount of water on each cylinder exhaust port. Water will evaporate immediately on good cylinders and slowly on the missing cylinder. If this can't be accomplished pull the plugs and check the condition.

    Searches related to P0745 - Pressure Control Solenoid Malfunction 'A'
    • p0745 pressure control solenoid malfunction ford
    • pressure control solenoid a
    • p0745 nissan - line pressure solenoid valve fault
    • p0745 pressure control solenoid malfunction ford explorer
    • p0745 nissan altima
    • p0745 mercury mountaineer
    • pressure control solenoid nissan altima
    • pressure control solenoid b
     

Share This Page