P0807 Code - Clutch Position Sensor Circuit Low

What does P0807 Mean?

The PCM has detected a fault in the clutch position sensor circuit. The clutch position sensor circuit is sometimes called the clutch start switch because it must be closed for the starter to engage. This code applies only to vehicles equipped with a manual transmission. If this code is exhibited in a vehicle with an automatic transmission, suspect a defective PCM or programming error.

engine code P0807	P0807 fix	obd P0807	dtc P0807
obd code P0807	obd2 P0807	P0807 car code	diagnostic code P0807
car code P0807	check engine code P0807	fehlercode P0807	P0807 fiat
codigo P0807	codigo falla P0807	P0807 kody b??dów	codigo de falla P0807

What are the common causes of P0807 ?

• Faulty IMRC actuator relay (if equipped)
• A large air leak at or near the number one oxygen sensor would also cause a lean mixture.
• Faulty IMRC actuator/sensor

How do you troubleshoot P0807 ?

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0807 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Searches related to P0807 - Clutch Position Sensor Circuit Low

• clutch position sensor ford focus
• clutch position sensor circuit ford focus
• p0805 "clutch position sensor circuit"
• clutch position sensor ford fiesta