P0830 Code - Clutch Pedal Switch 'A' Circuit

Discussion in 'P - Powetrain Codes' started by fault code, Mar 25, 2018.

Tags:
  1. fault code

    fault code Administrator Staff Member

    Joined:
    May 11, 2017
    Messages:
    1,023
    Likes Received:
    0
    Trophy Points:
    36
    What does P0830 Mean?

    OBD-II Code Engine may not start is defined as a Clutch Pedal Switch "A" Circuit

    The Clutch Pedal Position Sensor tells the engine control module (PCM) that the clutch pedal is depressed. When the PCM detects an incorrect signal from the Clutch Position Sensor, the PCM will set code P0830.

    engine code P0830P0830 fixobd P0830dtc P0830
    obd code P0830obd2 P0830P0830 car codediagnostic code P0830
    car code P0830check engine code P0830fehlercode P0830P0830 fiat
    codigo P0830codigo falla P0830P0830 kody b??dówcodigo de falla P0830

    What are the common causes of P0830 ?

    The most common causes of this type of malfunction code being stored are due to a defective or misadjusted clutch position sensor. Other possible causes include shorted, open, or corroded wiring and/or electrical connectors.

    4.jpg

    How do you troubleshoot P0830 ?

    Check to make sure they are not burnt or corroded. If in doubt, get some Electrical Contact cleaner at any parts store if cleaning of the terminals is needed. With the valve disconnected, the red voltmeter lead should be attached to the IMRC valve power wire and the black voltmeter lead connected to ground.

    Searches related to P0830 - Clutch Pedal Switch 'A' Circuit
    • clutch pedal switch a circuit jeep wrangler
    • p0830 hyundai
     

Share This Page